Go to retail Small shop
Po-Pia: 6:15-14:45 +421 (0)44/ 4351645
SK  EN  RU
E-shop

Solar cells AKYSUN

Easy and cheap heating of water in your pool

Description of a product

 

Solárny článok AKYSUNSolar cell AKYSUN is produced from PP, which is stabilized against UV radiation. The base is a special twin-wall sheet in which a water flows and heating-up by an influence of a solar radiation.

Principle and function

 

 

 

Calculation of recommended area and number of a solar cells for your pool

In a chart we come out from a standard deep of a home pool 1,2m. in case your pool is deeper, come out during designation of area of cells from the total water volume.

Pool dimensions

Water area

Water volume

Recommended surface of a cells

Recommended number of a cells

(m x m x m)

m2

m3

m2

3×1 m

8×4 x 1,2

32

38,4

16

5

9×4 x 1,2

36

43,2

18

6

10×5 x 1,2

50

60

24

8

11×5 x 1,2

55

66

28

9

Placing of a cells

  1. Orientation- optimal alignment is on the south. Slight deflection is more favorable on the west than on the east.
  2. Slope- optimal slope during which cells achieve maximal performance is approximately 45. Minimal slope is 10.
  3. Placing- it is important to avoid a shadows and places with a changeable sunshine for example surrounding of houses, trees. In case of paralel installation of a cells, may one cell shades to the other.
  4. Shoulder of a cells- during choosing of a place it is important to consider a danger of damage of the cells by a wind. Montage is performed by a nylon courts on a roof cover, frame holders, piles of concrete or decking from a wood, enabling a placing on the elevated place. It is also possible a placing on a ground without any support.

Important advices with an installation

  1. filtration pump has to be set on a dayly regime, because during night cells work in reverse. Water is cooled.
  2. Pipe distribution can me from PP, PE or PVC material
  3. Recommended overflow is 100-250l/hod/m2 of a cell
  4. Dimension of a pipe: inlet as well as drain 40mm
  5. For a dimensioning of a pump are determining a height of placing of the cells and pressure losses in a system (pipe distribution, filter, throttling or three-way valve)

Technical parametres

Type

HOBBY15

PROFI 20

PROFI 30

Width

1200 mm

1200 mm

1200 mm

Length

1500 mm

2000 mm

3000 mm

Size

5 mm

5,2 mm

5,2 mm

Tube

d 50

d 50

d 50

Area

1,87 m2

2,4 m2

3,6 m2

Surface weight

1,2 kg/m2

2,0 kg/m2

2,0 kg/m2

 
 
Free transport of purchased material in SR area
Free technical advisory service
Formatting on exact size
How to correctly choose a product?
What size is needed?
When in purchase better than repair?

Did not you find the answer on your question? » Write us.