Go to retail Small shop
Po-Pia: 6:15-14:45 +421 (0)44/ 4351645
SK  EN  RU
E-shop

Acrylic glass AKRYLON, PLEXIGLAS

Plexisklo AKRYLON, PLEXIGLAS - Plexisklo AKRYLON, PLEXIGLAS - 2 Plexisklo AKRYLON, PLEXIGLAS - 3
Plexisklo AKRYLON, PLEXIGLAS - 4 Plexisklo AKRYLON, PLEXIGLAS - 5 Plexisklo AKRYLON, PLEXIGLAS - 6
Plexisklo AKRYLON, PLEXIGLAS - zelený Plexisklo AKRYLON, PLEXIGLAS - oranžový Plexisklo AKRYLON, PLEXIGLAS - PMMA XT a PMMA GS

Features

  • good impact resistance
  • option of bending during cold
  • very good transmissivity of light 92%
  • safety
  • easy workability
  • high resistance against UV radiation
  • good acoustic and thermal isolation features

Usage

  • advertising banner, signs and plastic letters
  • colorful light ads
  • table information stands and models for exhibitions
  • protective covers of machines
  • covering of sheds and platforms
  • fillings of windows and doors
  • interior equipment, separation walls
  • anti-noise barriers

Types of materials

  • Extruded acrylic glass XT- more prone to the creation of voltage cracks because of greater internal strains in a material, what can be manifested in a form of hairline cracs for instance in a bonded joint. This phenomenon can be deleted by annealing. Advantage is a lower price.
  • Cast acrylic glass GS- higher quality of surface, easier workability, smaller inner strain, higher price
  • Cast acrylic glass GS SC- cast acrylic glass reinforced by a polyamid fibers- highest quality and safety

Processing

  • cutting- by a table or hand circular saw with uncrossed saw tooth (cutting teeth in alignment). During cutting of sheets of size 4 mm and coarser the pitch of teeth should be 13mm. During cutting is good to cool by a water or air. Teeth of cutting disc should protrude slightly under the sheet surface.
  • Breaking- is possible with sheets of size max 3mm and legth max 500mm
  • Drilling- by an ordinary cone or spiral drills with angle 60-90
  • Machining- miller, cutting plotters, laser
  • Thermoforming- forming temperature 150-160 with extruded and 160-175 with a cast sheets. Heating spiral is used as a heating source for a spot heating, for a total heating a therma stove i sused. Time of a heating is dependent on a size of material.
  • Bending during cold- minimal bending radius......x size of material
  • Bonding- by glues ACRIFIX unary or binary. Apply by a syringe, bonded areas connect immediately after detection of bubbles
  • Polishing- possible to polish manualy as well as machinely on a surface or on edges, only with using recommended polishing pastes

Formats and realizations

Standard dimenzions

  • format 2050×3050 mm
    1500×1000 mm with clear sheets from 2 to 10 mm
  • size 2, 3, 4, 5, 6, 8, 10, 12, 15, 20, 25 mm

Shade

Available is a wide range of color shades

Additional assortment

  • tubes: outter average from 5-200mm, in standard lenght 2000mm (average...)
  • rods: from average 2mm to 100mm in standard lenght 2000 mm
  • profiles: square rods
  • glues: unary ACRIFIX 192, binary ACRIFIX 190
  • cleaning and polishing pastes

New

PERSPEX FROST

New surface adjustment FROST in combination with new shades- for solving of interiors and other creative applications in many other departments

Shades

Artic Blue, Aurora Violet, Glacier Green, Blush Pink, Lemon Sorbet, Polar White, Crystal

Specialities

Acrylic glass UVT SOLAR- is a material specially developed for a covers of tanning solarium tubes. Contrary to a traditional acrylate it is characterized by high transmissivity of UV-A radiation and limited transmissivity of UV-B radiation of solar spectrum

 
Free transport of purchased material in SR area
Free technical advisory service
Formatting on exact size
How to correctly choose a product?
What size is needed?
When in purchase better than repair?

Did not you find the answer on your question? » Write us.